Customer matched zone "Australia Post"
“sE T2 Large-diaphragm Multi-pattern Condenser Microphone w/Titanium Capsule” has been added to your cart.
View cart
Audio Interfaces, Bundles, Guitar, Guitar Accessories, IK Multimedia, Instruments, Mix & Mastering Software, Software & Plug-Ins, Studio Gear, USB Audio Interfaces, Virtual InstrumentsIK AXE I/O + AmpliTube 5 MAX + TONEX MAX Bundle
$945.00 $1,039.99
In stock
IK AXE I/O + AmpliTube 5 MAX + TONEX MAX Bundle
| Weight |
4.575 kg |
| Dimensions |
29.972 × 25.654 × 13.208 cm |
| brands |
Ik Multimedia
|
Specification
| COMMON |
|
| Conversion: |
24-bit A/D, 24-bit D/A |
| Sampling Rate: |
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz |
| Power: |
DC IN |
| Device Connection: |
USB B-Type 2.0 |
| Enclosure: |
metal sheet |
Line Outputs 1-2 (Monitor)
|
|
| Configuration: |
Electronically balanced and floating, automatically compensates level when connection is balanced or unbalanced, tip hot. |
| Output impedance: |
150 Ohms balanced, 75 Ohms unbalanced |
| Output Level: |
0 dBFS corresponds to +21 dBu |
| Frequency response: |
From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
116 dB(A) |
| THD+N: |
-106 dB(A) at -1 dBFS |
| Channels 1-2 crosstalk: |
115 dB(A) |
Line Outputs 3-4
|
|
| Configuration: |
Unbalanced |
| Output impedance: |
75 Ohms |
| Output Level: |
0 dBFS corresponds to +16 dBu |
| Frequency response: |
From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
115 dB(A) |
| THD+N: |
-102 dB(A) |
| Channels 3-4 crosstalk: |
112 dB(A) |
Output 5 (Amp output)
|
|
| Configuration: |
Unbalanced, floating, with selectable ground lift |
| Output impedance: |
100 Ohms |
| Output Level: |
0 dBFS corresponds to -6 dBu |
| Frequency response: |
From 10 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
110 dB(A) |
| THD+N: |
-104 dB(A) |
Headphones Out
|
|
| Output impedance: |
Virtually ideal source (zero Ohms) until clipping |
| Maximum Output level: |
+12 dBu into 50 Ohms load (approx 180 mW) |
| Frequency response: |
From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
112 dB(A) |
| THD+N: |
-100 dB(A) |
Mic Inputs 1-2
|
|
| Configuration: |
Class-A discrete differential microphone preamp, pin 2 hot |
| Input impedance: |
4 kOhms differential |
| Input level, min gain: |
0 dBFS is obtained with a +12 dBu signal at the XLR input |
| Input level, max gain: |
0 dBFS is obtained with a -37 dBu signal at the XLR input |
| Frequency response: |
From 5 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
116 dB(A) |
| THD+N: |
-106 dB(A) at -10 dBFS |
Line Inputs 1-2
|
|
| Configuration: |
Class-A discrete differential line receiver, tip hot |
| Input impedance: |
20 kOhms differential |
| Input level, min gain: |
0 dBFS is obtained with a +26 dBu signal at the TRS input |
| Input level, max gain: |
0 dBFS is obtained with a -24 dBu signal at the TRS input |
| Frequency response: |
From 5 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
116 dB(A) |
| THD+N: |
-106 dB(A) at -10 dBFS |
Instrument Inputs 1
|
|
| Configuration: |
Multiple topology instrument preamp |
| Input impedance, PASSIVE mode: |
Variable from 1 MOhms down to 2.2 kOhms |
| Input impedance, ACTIVE mode: |
10 kOhms |
| Input level, min gain: |
0 dBFS is obtained with a +14 dBu signal at the TS input |
| Input level, max gain: |
0 dBFS is obtained with a -17 dBu signal at the TS input |
| Frequency response: |
From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
117 dB(A) |
| THD, PURE mode: |
0.0015 % |
| THD, JFET mode: |
0.5 % |
Instrument Inputs 2
|
|
| Configuration: |
Hi-Z instrument preamp |
| Input impedance: |
1 MOhms |
| Input level, min gain: |
0 dBFS is obtained with a +14 dBu signal at the TS input |
| Input level, max gain: |
0 dBFS is obtained with a -17 dBu signal at the TS input |
| Frequency response: |
From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
117 dB(A) |
| THD: |
0.006% |
Front Panel
- Two 1/4″ instrument input jacks
- Two analog potentiometers for Input GAIN
- Two 5 segments input level meter (peak)
- Two INST, LINE, MIC LEDs
- Analog potentiometers for Z-Tone control
- Pick-Up selector (PASSIVE/ACTIVE)
- Preamp topology selector (JFET/PURE)
- +48V phantom power switch
- Tuner switch
- Tuner display and LEDs
- USB LEDS
- MIDI IN/OUT LEDs
- push-encoder for Presets
- Monitor knob
- 1/4″ headphones output jack
- Master potentiometer for main output control
- 1/4″ Amp output jack
Rear Panel
- On/Off power switch
- External DC power input
- MIDI I/O 5-pin DIN connectors
- B-Type USB socket for connecting a computer (Mac/PC)
- 2 x 1/4″ TRS External controllers sockets
- 2 x 1/4″ TRS Balanced floating line outputs
- 2 x 1/4″ TRS Unbalanced line outputs
- 2 Combo sockets for MIC input and Instrument input (auto selecting)
Dimensions
| Size |
23.8cm/9.37″ x 21.1cm/8.31″ x 5.3cm/2.09″ |
| Weight |
1.3kg/2.9lb |
- AXE I/O
- USB A-Type to USB B-Type connection cable (1.5m/4.32ft)
- DC power supply
Computers
64-bit application. Requires a 64 bit CPU and Operating System.
Mac® (64-bits)
Minimal: macOS 10.11 or later. One free USB port.
Windows® (64-bits)
Minimal: Windows 7 or later. One free USB port.
Based on 0 reviews
0.0 overall
sE T2 Large-diaphragm Multi-pattern Condenser Microphone w/Titanium Capsule 
There are no reviews yet.