IK iLoud Precision 6 MKII Wall/Ceiling Mounting Bracket (Each)

The iLoud Precision 6 MKII mounting bracket is IK Multimedia’s dedicated wall and ceiling mount for the Precision 6 MKII studio monitor. It is made for studios building Dolby Atmos or surround rooms, post-production suites and permanent installations, and for anyone who wants their monitors off the desk and aimed precisely at the mix position.

Why a Dedicated Bracket?

The MKII generation of iLoud Precision monitors introduced built-in mounting points on the cabinet, and IK designed a separate bracket for each model to fit them. Because this bracket is made for the Precision 6 MKII cabinet, there is no guesswork with universal clamps or shelf brackets, and the monitor stays secure in its intended orientation. IK makes separate brackets for the Precision 5 MKII and Precision MTM MKII, so choose the one that matches your monitor.

Built for Immersive and Fixed Installations

Height and overhead channels in a Dolby Atmos room have to be placed where stands simply can’t go. The bracket supports both wall and ceiling mounting, so the same part covers side, rear and overhead positions. That matters for the Precision 6 MKII in particular, because each unit is calibrated in Italy to tight tolerances and ARC X Immersive can be enabled on eligible systems of four or more iLoud speakers.

Aim Every Monitor at the Sweet Spot

The steel bracket adjusts in two directions, so you can tilt and turn each monitor toward the listening position after it is installed. Correct aiming keeps the tweeter on axis with your ears, which is just as important on a wall or ceiling as it is on a stand.

Installation Tips

• Fix into structure. Each Precision 6 MKII weighs 7.9kg. Fix the bracket into studs, joists or masonry with fixings rated for the wall type, never into plasterboard alone. If in doubt, use a qualified installer.
• Plan cable runs first. Each monitor needs mains power and a balanced XLR or TRS signal cable, plus access to the USB port if you plan to update firmware or connect ARC X directly.
• Aim, then calibrate. Set the final angle of every monitor before running ARC X from the listening position. If you re-aim a speaker later, measure again.
• Keep it symmetrical. In stereo and immersive layouts, match heights and angles between left and right pairs so the room affects them equally.

Who Is It For?

• Studios building 5.1, 7.1.4 or other Dolby Atmos layouts with Precision 6 MKII monitors
• Post-production and broadcast rooms that need permanent, tamper-free speaker positions
• Small rooms where stands would take up too much floor space
• Owners who want a clear desk without the reflections a desk surface can add

It is not the right part for the original (MKI) iLoud Precision 6, which does not have the MKII cabinet’s mounting points, or for the Precision 5 MKII and Precision MTM MKII, which have their own brackets.

Bracket vs Stands

Floor stands are easier to move and need no drilling, which suits rented rooms and setups that change often. A mounting bracket wins when positions are permanent, when speakers must sit at heights stands can’t reach, or when floor space is tight. Compare options in our stands range, or browse the full active studio monitors collection.

Key Features

• Designed specifically for the iLoud Precision 6 MKII
• Attaches to the monitor’s built-in mounting points
• Wall and ceiling mounting
• Steel construction, black finish
• Adjustable in two directions for precise aiming
• Ideal for Dolby Atmos, surround and permanent installs
• Sold individually

FAQ

Does it fit the original iLoud Precision 6?

No. The mounting points that this bracket uses were introduced with the MKII generation. It is designed for the Precision 6 MKII.

Will it fit the Precision 5 MKII or Precision MTM MKII?

IK sells a separate dedicated bracket for each of those models, so choose the bracket that matches your monitor.

Is it sold as a pair?

No, the price is for one bracket. A stereo pair needs two, and an immersive system needs one per mounted monitor.

Should I recalibrate after mounting?

Yes. Moving a monitor from a desk or stand to a wall or ceiling changes how the room affects it, so run ARC X again from the listening position once every bracket is set to its final angle.

Does it come with wall fixings?

Wall types vary, so always use screws and anchors rated for your wall or ceiling and for the monitor’s 7.9kg weight.