Customer matched zone "Australia Post"
“sE V3 Cardioid Dynamic Microphone” has been added to your cart.
View cart
“sE V3 Cardioid Dynamic Microphone” has been added to your cart.
View cart
Audio Interfaces, Bundles, Guitar, Guitar Accessories, IK Multimedia, Instruments, Mix & Mastering Software, Software & Plug-Ins, Studio Gear, USB Audio Interfaces, Virtual InstrumentsIK AXE I/O + AmpliTube 5 MAX + TONEX MAX Bundle
$945.00 $1,039.99
In stock
IK AXE I/O + AmpliTube 5 MAX + TONEX MAX Bundle
| Weight |
4.575 kg |
| Dimensions |
29.972 × 25.654 × 13.208 cm |
| brands |
Ik Multimedia
|
Specification
| COMMON |
|
| Conversion: |
24-bit A/D, 24-bit D/A |
| Sampling Rate: |
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz |
| Power: |
DC IN |
| Device Connection: |
USB B-Type 2.0 |
| Enclosure: |
metal sheet |
Line Outputs 1-2 (Monitor)
|
|
| Configuration: |
Electronically balanced and floating, automatically compensates level when connection is balanced or unbalanced, tip hot. |
| Output impedance: |
150 Ohms balanced, 75 Ohms unbalanced |
| Output Level: |
0 dBFS corresponds to +21 dBu |
| Frequency response: |
From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
116 dB(A) |
| THD+N: |
-106 dB(A) at -1 dBFS |
| Channels 1-2 crosstalk: |
115 dB(A) |
Line Outputs 3-4
|
|
| Configuration: |
Unbalanced |
| Output impedance: |
75 Ohms |
| Output Level: |
0 dBFS corresponds to +16 dBu |
| Frequency response: |
From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
115 dB(A) |
| THD+N: |
-102 dB(A) |
| Channels 3-4 crosstalk: |
112 dB(A) |
Output 5 (Amp output)
|
|
| Configuration: |
Unbalanced, floating, with selectable ground lift |
| Output impedance: |
100 Ohms |
| Output Level: |
0 dBFS corresponds to -6 dBu |
| Frequency response: |
From 10 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
110 dB(A) |
| THD+N: |
-104 dB(A) |
Headphones Out
|
|
| Output impedance: |
Virtually ideal source (zero Ohms) until clipping |
| Maximum Output level: |
+12 dBu into 50 Ohms load (approx 180 mW) |
| Frequency response: |
From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
112 dB(A) |
| THD+N: |
-100 dB(A) |
Mic Inputs 1-2
|
|
| Configuration: |
Class-A discrete differential microphone preamp, pin 2 hot |
| Input impedance: |
4 kOhms differential |
| Input level, min gain: |
0 dBFS is obtained with a +12 dBu signal at the XLR input |
| Input level, max gain: |
0 dBFS is obtained with a -37 dBu signal at the XLR input |
| Frequency response: |
From 5 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
116 dB(A) |
| THD+N: |
-106 dB(A) at -10 dBFS |
Line Inputs 1-2
|
|
| Configuration: |
Class-A discrete differential line receiver, tip hot |
| Input impedance: |
20 kOhms differential |
| Input level, min gain: |
0 dBFS is obtained with a +26 dBu signal at the TRS input |
| Input level, max gain: |
0 dBFS is obtained with a -24 dBu signal at the TRS input |
| Frequency response: |
From 5 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
116 dB(A) |
| THD+N: |
-106 dB(A) at -10 dBFS |
Instrument Inputs 1
|
|
| Configuration: |
Multiple topology instrument preamp |
| Input impedance, PASSIVE mode: |
Variable from 1 MOhms down to 2.2 kOhms |
| Input impedance, ACTIVE mode: |
10 kOhms |
| Input level, min gain: |
0 dBFS is obtained with a +14 dBu signal at the TS input |
| Input level, max gain: |
0 dBFS is obtained with a -17 dBu signal at the TS input |
| Frequency response: |
From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
117 dB(A) |
| THD, PURE mode: |
0.0015 % |
| THD, JFET mode: |
0.5 % |
Instrument Inputs 2
|
|
| Configuration: |
Hi-Z instrument preamp |
| Input impedance: |
1 MOhms |
| Input level, min gain: |
0 dBFS is obtained with a +14 dBu signal at the TS input |
| Input level, max gain: |
0 dBFS is obtained with a -17 dBu signal at the TS input |
| Frequency response: |
From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) |
| Dynamic Range: |
117 dB(A) |
| THD: |
0.006% |
Front Panel
- Two 1/4″ instrument input jacks
- Two analog potentiometers for Input GAIN
- Two 5 segments input level meter (peak)
- Two INST, LINE, MIC LEDs
- Analog potentiometers for Z-Tone control
- Pick-Up selector (PASSIVE/ACTIVE)
- Preamp topology selector (JFET/PURE)
- +48V phantom power switch
- Tuner switch
- Tuner display and LEDs
- USB LEDS
- MIDI IN/OUT LEDs
- push-encoder for Presets
- Monitor knob
- 1/4″ headphones output jack
- Master potentiometer for main output control
- 1/4″ Amp output jack
Rear Panel
- On/Off power switch
- External DC power input
- MIDI I/O 5-pin DIN connectors
- B-Type USB socket for connecting a computer (Mac/PC)
- 2 x 1/4″ TRS External controllers sockets
- 2 x 1/4″ TRS Balanced floating line outputs
- 2 x 1/4″ TRS Unbalanced line outputs
- 2 Combo sockets for MIC input and Instrument input (auto selecting)
Dimensions
| Size |
23.8cm/9.37″ x 21.1cm/8.31″ x 5.3cm/2.09″ |
| Weight |
1.3kg/2.9lb |
- AXE I/O
- USB A-Type to USB B-Type connection cable (1.5m/4.32ft)
- DC power supply
Computers
64-bit application. Requires a 64 bit CPU and Operating System.
Mac® (64-bits)
Minimal: macOS 10.11 or later. One free USB port.
Windows® (64-bits)
Minimal: Windows 7 or later. One free USB port.
Based on 0 reviews
0.0 overall
sE V3 Cardioid Dynamic Microphone
2 × $169.99 
sE V3 Cardioid Dynamic Microphone 
There are no reviews yet.