ART Pro Audio
Showing all 14 results
-
Patchbays & Routing
ART CleanBOX II Two-Channel Hum Eliminator
- Removes ground loop hum between audio equipment
- Two channels for stereo or two separate mono signals
- Isolation transformer on each channel
- Passive design: no power supply needed
- 1/4″ TRS inputs and outputs, balanced or unbalanced
- Wide 10 Hz to 50 kHz frequency response
SKU: ARTP_CLEANBOX-2 -
Patchbays & Routing
ART CleanBox Pro Dual-Channel Level Converter
- Converts -10 dBV consumer level to +4 dBu balanced pro level
- Also converts balanced +4 dBu back down to -10 dBV unbalanced
- 2 channels in each direction, usable at the same time
- RCA and 1/8″ jacks on the consumer side, XLR on the pro side
- Separate stereo level controls for each direction
- Rugged extruded aluminium case, power supply included
SKU: ARTP_CLEANBOXPROCE -
Signal Splitters & Isolation
ART CoolSWITCH A/B-Y Switch Pedal
- A/B-Y switching: amp A, amp B, or both at once
- Switch one instrument between two amps or amp channels
- Two parallel Common jacks, handy for a tuner
- LEDs show which output is active
- Compact 90 x 63 mm footprint
- 9V battery included
SKU: ARTP_COOLSWITCH -
DI Boxes
ART dPDB Dual Passive DI Box
- Two passive DI channels in one enclosure
- Ideal for stereo keyboards, DJ mixers and laptops
- Switchable 0, -20 and -40 dB pad on each channel
- Ground lift switch on each channel
- Parallel link jack per channel to feed an amp
- Rugged steel chassis, no power required
SKU: ARTP_dPDB -
Microphone Preamps
ART Dual RP Two-Channel Inline Preamp for Ribbon and Dynamic Microphones
- Two channels of clean, low-noise gain for dynamic and ribbon mics
- Up to 27 dB gain into 10 kΩ, 20 dB into 600 Ω
- Runs on 48V phantom power, with no batteries or power supply
- Doesn’t pass phantom power on to the mic, protecting ribbons
- Variable input impedance from 150 Ω to 10 kΩ per channel
- Switchable 100 Hz low-cut filter
SKU: ARTP_DRP -
DI Boxes
ART Dual XDirect Two-Channel Active DI Box
- Two independent active DI channels in one box
- 470 kΩ input impedance, ideal for passive pickups and piezos
- Runs on 18 to 48V phantom power or a 9V battery
- Switchable 0 or -30 dB pad and ground lift per channel
- Combo 1/4″ TRS/XLR inputs and 1/4″ thru jacks
- 10 Hz to 100 kHz frequency response
SKU: ARTP_DUALXDIRECT -
DI Boxes
ART Dual ZDirect Two-Channel Passive DI Box
- Two independent passive DI channels with isolation transformers
- Switchable 0, -20 and -40 dB pad on each channel
- Ground lift, phase invert and 30 kHz low-pass filter per channel
- Thru jacks to feed amps or tuners
- No batteries or phantom power required
- Compact black anodised aluminium case
SKU: ARTP_DUALZDIRECT -
Headphone Amplifiers, Weekly Deals
ART HeadAMP 4 Pro Headphone Amplifier with Talkback
- Multi-channel stereo headphone amplifier, independent volume per output
- Up to 150 mW per channel for loud, clean cue mixes
- Built-in talkback: XLR mic input with phantom power, footswitchable
- Talk to one performer or all of them
- Separate aux inputs for personal “more me” mixes
- Balanced main inputs, wide 10 Hz to 40 kHz response
SKU: ARTP_HEADAMP4PROCE -
Headphone Amplifiers, Headphones
ART HeadAmp6 Pro Professional Six Channel Headphone Amplifier
- Six stereo channels, up to 12 pairs of headphones
- Aux input on every channel for personal “More Me” mixes
- Bass and treble EQ plus mono switching per channel
- 500 mW per channel into 32 Ω headphones
- Balanced XLR/TRS inputs with Thru for chaining units
- Compact 1U rackmount chassis
SKU: ARTP_HEADAMP6PROCE -
Headphone Amplifiers, Headphones
ART HeadAmp6 Six Channel Stereo Headphone Amplifier
- Six stereo channels, up to 18 pairs of headphones
- Front aux input on every channel for “More Me” mixes
- Mono and mute L/R switching per channel
- 500 mW per channel into 32 Ω headphones
- Balanced XLR/TRS inputs with Thru for chaining
- Compact 1U rackmount chassis
SKU: ARTP_HEADAMP6CE -
Analog & USB Mixers, Mixers
ART TubeMix Five Channel Stereo USB Mixer
- Assignable 12AX7 tube for warmth on mics or instrument
- Two low-noise mic preamps with switchable +48V phantom power
- 1 MΩ Hi-Z instrument input with built-in amp simulator
- Driver-free USB 2.0 audio for Mac, Windows and Linux
- 3-band EQ and aux sends on every channel
- Vintage VU meters and wooden side panels
SKU: ARTP_TUBEMIXU -
Audio Interfaces, Microphone Preamps, Studio & Recording
ART USB Dual Pre Project Series Two Channel Preamp / USB Interface
Audio Interfaces, Microphone Preamps, Studio & RecordingART USB Dual Pre Project Series Two Channel Preamp / USB Interface
- Two XLR / 1/4″ combo inputs with up to 48 dB of gain each
- Switchable +48V phantom power for condenser microphones
- Runs on USB bus power, a 9V battery or an optional adaptor
- Zero-latency monitoring with an input / playback mix control
- Class-compliant USB, no special driver needed
- Compact, stackable all-aluminium chassis
SKU: ARTP_USBDUALPREPS -
Analog & USB Mixers, Audio Interfaces, Mixers, Studio & Recording
ART USBMix6 Six Channel Mixer / USB Audio Interface with Effects
Analog & USB Mixers, Audio Interfaces, Mixers, Studio & RecordingART USBMix6 Six Channel Mixer / USB Audio Interface with Effects
- 6 inputs: 2 mic/instrument/line combos plus 2 stereo line pairs
- Switchable +48V phantom power for condenser mics on channels 1 and 2
- 16 built-in stereo effects with per-channel sends
- Class-compliant USB audio for Mac and PC, no driver needed
- High and low EQ on every channel
- Works as a standalone mixer without a computer
SKU: ARTP_USBMIX6CE -
DI Boxes
ART ZDirect Passive DI Box
- Fully passive: no batteries or phantom power needed
- Turns unbalanced 1/4″ signals into a balanced XLR output for long cable runs
- Switchable 0, -20 and -40 dB pad for instruments, line and speaker-level sources
- Ground lift, phase invert and a 30 kHz low-pass filter to fight hum and noise
- Thru jack to feed your amp at the same time
- Compact black anodised aluminium case
SKU: ARTP_ZDIRECT
