, , , , , ,

sE T2 Matched Pair Large-diaphragm Multi-pattern Condenser Microphones w/Titanium Capsules

Se Electronics
Availability:

In stock


  • Omni, Cardioid & Supercardioid Patterns
  • Pad and Low Roll-Off Switches
  • Natural Flat Frequency Response
  • Ideally Suited for Percussive Signals

$1,599.00

In stock

The T2 is the ultimate combination of solid-state performance and versatility. Based on the chassis and feature spec of the acclaimed 4400a, but with the highly specialized capsule of the original sE Titan, it delivers full and perfectly balanced mid and low frequencies, while its titanium capsule produces un-hyped but ultra-detailed HF response.

TUNED & SONICALLY MATCHED IN-HOUSE

Each T2 Matched-Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two T2 microphones.

CUSTOM SHOCKMOUNT + CHASSIS

The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, used flat against a drum head or guitar cab, among many other use cases, and provides exceptional protection from low-end rumble and footfall noise.

The Titanium Diaphragm

Unusually, the T2 features a hand-crafted titanium-sputtered capsule. This is much stiffer than our gold-sputtered capsules, meaning quicker transient response, which is important when recording instruments that create fast transients and attack – like drums and percussion – as it enables the microphone to maintain clarity and deliver exceptionally accurate performances. The stiffness of this special diaphragm also allows it to withstand extremely high sound pressure levels, so it can handle the loudest percussion with ease.

SWITCHABLE BASS-CUT AND PAD

For vocals and instruments, the 60 / 120 Hz bass-cut filters and -10 / -20 dB pads make the T2 useful for loud and heavy sources like drum kits, percussion, guitar/bass cabs and much more.

ALL-METAL HOUSING

The T2’s all-metal housing and titanium-sputtered diaphragms ensure maximum reliability on vocals, instruments and more, in studios and on-stage.

GOLD-PLATED XLR CONNECTOR

Ensures loss-free, reliable signal connection for years and years of demanding use in the studio and the loudest stages worldwide.

CUSTOM SHOCKMOUNT + CHASSIS

The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around and used flat against a drum head or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3/4″ thick, it fits neatly in the palm of your hand, but is built to take a beating on the road.

 

What’s in the Metal Case:

  • T2 microphone (x2)
  • Custom shockmount + thread adapter (x2)
  • Stereo mounting bar
Weight 3.6514186 kg
Dimensions 35.814 × 27.686 × 14.732 cm
brands

Se Electronics

Specifications

 

Polar patternsCardioid, Hyper Cardioid, Omni, Figure-8
Frequency range 20 Hz – 20 kHz
Sensitivity 25 mV / Pa (-32 dBV)
Max SPL122 / 132 / 142 dB (0 / -10 / -20 dB pad) (0.5% THD @ 1kHz)
Equivalent noise level 16 dB
Signal to noise ratio 78 dB
Low-cut filter 60 / 120 Hz
Attenuation pad 10 / 20 dB, switchable

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “sE T2 Matched Pair Large-diaphragm Multi-pattern Condenser Microphones w/Titanium Capsules”

There are no reviews yet.

We’re on holiday from 24/12/2024 to 07/01/2025. No shipments, but you can still place orders as usual!

X